MN2000000107
Page 13
on-screen instructions to complete the Windows installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At
Found New Hardware Wizard
, click
Next
.
3.
Select
Search for a suitable driver for my device(recommend)
then click
Next
.
4.
Insert the driver CD, check
CD-ROM drives
, uncheck the other
boxes, click
Next
, then click
Next
again.
5.
If the
Digital Signature Not Found
message appears, click
Yes
.
Our driver has been thoroughly tested for stability and
compatibility.
6.
Click
Finish
.
For Windows® XP/Server 2003
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
“
PCI_IO\Sata\RAID
” folder, found on the driver CD, onto a
