MN2000000107
Page 12
your system starts up. If the BIOS doesn’t show, please try your
controller in another PCI slot. During this (POST) process, the BIOS
will show up and indicate the devices attached to it.
Driver Installation
For Windows® 2000
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
“
PCI_IO\Sata\RAID
” folder, found on the driver CD, onto a
blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Windows® 2000 installation procedure.
3.
At the Windows® 2000 Setup screen, press
F6
to install the RAID
driver.
4.
When prompted, press
S
to specify the location of the driver.
5.
Insert the floppy disk, then press
Enter
.
6.
Select
Silicon Image SiI 3x12 SATARAID Controller for
Windows NT 4.0 and 2000
, then press
Enter
.
7.
Press
Enter
again to finish driver installation, then follow the
