MN2000000107
Page 17
3.
At the Windows Setup screen, press
Load Driver
to install the
RAID driver.
4.
Insert the floppy disk, please select
Silicon Image SiI 3512
SATARaid Controller (A:\si3112r.inf)
, then press
Next
. (Change
A:\
to match your floppy drive letter)
5.
Follow the on-screen instructions to complete the Windows
installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At
Found New Hardware Wizard
, select
Locate and install
driver software (recommended)
.
3.
Please insert the CD driver bound with SATA 150 PCI RAID card
into your CD-ROM Drive, click
Next
.
4.
If the system prompts the user informing the drivers are not
signed, select the option
Install this driver software anyway
.
5.
Click
Close
to complete the installation.
