![background image](http://html1.mh-extra.com/html/vante/4600/4600_instruction-manual_3424031030.webp)
Vante
®
Model 4600
18
Figure 4.1 Releasing Fuse Holder Latch
Examine the fuse(s) and replace, as required. If the fuse(s) is (are) not blown, check
again to be sure all other connections are correct and place the fuse back into the fuse
holder slide.
CAUTION:
Replace the fuse with one of the specified rating only!
Push the fuse holder slide back into the power input receptacle until the latch engages.
Plug the AC power cord into the input power receptacle and the AC outlet. Turn the AC
power switch to the
"
|
"
(on) position. If the RF Ready light fails to illuminate, or if the
fuse blows again, contact Vante.
4.3
Repair
Other than external cleaning and vacuuming the fan, the Power Source is designed to be
maintenance free. Do not attempt a field repair of any kind. Questions regarding repairs
should be directed to an authorized Vante service center.
To return the Power Source to Vante for repair, call for a Return Material Authorization
(RMA) number with the unit serial numbers available.
Release latch with
screwdriver
Summary of Contents for 4600
