Swift1925Z Aura LED Moving Head Beam Wash Light User Manual Swift1925Z Aura LED Moving Head Beam Wash Light User Manual
the unit idle one minute to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press
ENTER
button to confirm, present mode will blink on
the display, use
UP
and
DOWN
button to select No (display always on) or Yes (display
goes off one minute after exiting menu mode), press
ENTER
button to store. Press
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Intensity
Select Backlight Intensity, press
ENTER
button to confirm, present mode will blink on
the display, use
UP
and
DOWN
button to adjust backlight intensity from 1 (dark) to 10
(bright), press
ENTER
button to store. Press
MENU
button back to the last menu or let
the unit idle one minute to exit menu mode.
Temperature Unit
Select Temperature Unit, press
ENTER
button to confirm, present mode will blink on
the display, use
UP
and
DOWN
button to select
℃
or
℉
, press
ENTER
button to store.
Press
MENU
button back to the last menu or let the unit idle one minute to exit menu
mode.
Display Warning
Select Display Warning, press
ENTER
button to confirm, present mode will blink on
the display, use
UP
and
DOWN
button to select No (Normal) or Yes (display will show
the error warning when the unit went wrong). Press
MENU
button back to the last menu
or let the unit idle one minute to exit menu mode.
Language
Select Language, press
ENTER
button to confirm, present mode will blink on the
display, use
UP
and
DOWN
button to select English or Chinese. Press
MENU
button
back to the last menu or let the unit idle one minute to exit menu mode.
Fixture Test
Enter MENU mode, select Fixture Test, press
ENTER
button to confirm, use
UP
and
DOWN
button to select Auto Test or Manual Test
Auto Test
Select Auto Test, press
ENTER
button to confirm, the unit will run built-in programs to
automatically test pan, tilt, color, gobo, shutter, dimmer, prism, red, green, blue, white,
CTC, frost, focus, and lamp on/off. Press MENU button back to the last menu or exit
menu mode after auto test.
Manual Test
Select Manual Test, press
ENTER
button to confirm, the present channel will show on
the display, use
UP
and
DOWN
button to select channel, press
ENTER
button to
confirm, then use
UP
and
DOWN
button to adjust the value, press
ENTER
button to
store, the fixture will run as the channel value indicates. Press
MENU
button back to
the last menu or exit menu mode let the unit idle one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter MENU mode, select Fixture Information, press
ENTER
button to confirm, use
UP
and
DOWN
button to select Fixture use time, Lamp on time or Firmware Version.
15
14
