Swift1925Z Aura LED Moving Head Beam Wash Light User Manual Swift1925Z Aura LED Moving Head Beam Wash Light User Manual
fixture.
Make sure to put the safety chain and check whether the screws are screwed properly
when installing the fixture.
Make sure the lens are in good condition. It’s recommended to replace the units if
there are any damages or severe scratch.
Make sure the fixture is operated by qualified personnel who knows the fixture before
using.
Keep the original packages if any second shipment is needed.
Don’t try to change the fixtures without any instruction by the manufacturer or the
appointed repairing agencies.
It is not in warranty range if there are any malfunctions from not following the user
manual to operate or any illegal operation, like shock short circuit, electronic shock,
lamp broke, etc.
Ⅳ
FEATURES AND SPECIFICATION
◇
Extremely small, fast and powerful LED moving beam.
◇
DMX Channels: 14CH, 27CH channels mode
◇
Operation modes: DMX512, Master/Slave
◇
Great built-in lighting shows under Master/Slave mode
◇
Blue LCD display for easy navigation
◇
Perfect for stage, theatre, TV studio, rental and discotheques
Voltage:
AC 100V~240V, 50/60Hz
Power consumption:
500W
LED:
19 X 25W RGBW LED
Dimension:
348X264X381mm
Weight:
9.2Kgs
Beam angel:
10°~60°
Ⅴ
DIMENSION
Unit: mm
Ⅵ
INSTALLATION AND CONNECTION
1. Installation
Be sure to install this product should be at least 0.5 m from the flammable materials
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second
05
04
