Swift1925Z Aura LED Moving Head Beam Wash Light User Manual Swift1925Z Aura LED Moving Head Beam Wash Light User Manual
241
←→
247
248
←→
255
Color32
Color33
CH15
000
←→
255
RING 2 RED (0%-100%)
CH16
000
←→
255
RING 2 GREEN (0%-100%)
CH17
000
←→
255
RING 2 BLUE (0%-100%)
CH18
000
←→
255
RING 2 WHITE (0%-100%)
CH19
000
←→
255
RING 2 COLOR PRESET
(The same as CH14: RING 1 COLOR PRESET)
CH20
000
←→
255
RING 3 RED (0%-100%)
CH21
000
←→
255
RING 3 GREEN (0%-100%)
CH22
000
←→
255
RING 3 BLUE (0%-100%)
CH23
000
←→
255
RING 3 WHITE (0%-100%)
CH24
000
←→
255
RING 3 COLOR PRESET
(The same as CH14: RING 1 COLOR PRESET)
CH25
000
‐
007
008
‐
022
023
‐
037
038
‐
052
053
‐
067
068
‐
082
083
‐
097
098
‐
112
113
‐
127
128
‐
142
143
‐
157
158
‐
172
RING COLOR MACRO
Blackout
Macro1
Macro2
Macro3
Macro4
Macro5
Macro6
Macro7
Macro8
Macro9
Macro10
Macro11
173
‐
187
188
‐
202
203
‐
217
218
‐
232
233
‐
247
248
‐
255
Macro12
Macro13
Macro14
Macro15
Macro16
Mocro17
CH26
000
←→
255
COLOR MACRO SPEED
CH27
000
←→
019
020
←→
255
Beam CTC(Color Temperature Control)
CTC disabled
CTC 10000K-2500K
Ⅸ
TROUBLE SHOOTING
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
2. If the DMX LED is on and no response to the channel, check the address settings and
DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB
of the unit or the previous one.
4. Try to use another DMX controller.
5. Check if the DMX cables run near or run alongside to high voltage cables that may
cause damage or interference to DMX interface circuit.
28
29
