USER MANUAL
31
• Make sure to turn on the Start•All Jump•Pack
®
before connecting to
the dead vehicle
• Verify the clamps are connected properly
• Verify that the dead vehicle is a 12V DC system
• Verify that the Start•All Jump•Pack
®
is adequately charged
If those steps do not resolve the problem you may manually activate
the system.
Caution: This activation disables some safety features.
MANUAL ACTIVATION FOR LOW VOLTAGE
BATTERIES
The Start•All Jump•Pack
®
is designed to jump start 12V DC lead-acid
batteries at very low voltage. If your battery is too low or unable to take
a charge, the unit will display alternating red and green "8"s. This is an
indication that the Start•All Jump•Pack
®
cannot detect a battery. If you
need to jump start a battery in this condition, turn on the headlights,
blower, and/or another accessory. If the Start•All Jump•Pack
®
still does
not activate, there is a Manual Activation feature, which allows you to
force “On” the jump start function.
CAUTION!
USE MANUAL ACTIVATION MODE WITH EXTREME
CARE. THIS MODE IS FOR 12V DC LEAD-ACID BATTERIES
ONLY. BOTH THE SPARK PROOF AND REVERSE POLARITY
PROTECTION FEATURES ARE DISABLED. PAY VERY CLOSE
ATTENTION TO THE POLARITY OF THE BATTERY BEFORE
USING THIS MODE. DO NOT ALLOW THE POSITIVE AND
NEGATIVE BATTERY CLAMPS TO TOUCH OR CONNECT AS THE
PRODUCT WILL GENERATE SPARKS. THIS MODE USES A VERY
HIGH CURRENT (UP TO 2500A) THAT CAN CAUSE SPARKS AND
HIGH HEAT IF NOT USED PROPERLY. IF YOU ARE UNSURE
ABOUT USING THIS MODE, DO NOT ATTEMPT AND SEEK
PROFESSIONAL HELP.
