USER MANUAL
13
NOTE:
It its possible for an E5 error code to be displayed. Please
refer to the Error code section of this manual for more information on
error codes
.
IMPORTANT NOTES
• FULLY CHARGE THE UNIT IMMEDIATELY UPON OPENING
BEFORE USING.
• FULLY CHARGE AFTER EACH USE.
•
FULLY CHARGE AT LEAST ONCE EVERY SIX (6) MONTHS.
(Failure to do so may cause damage and void warranty.)
Please read the entire instruction manual before operating the
Start•All Jump•Pack
®
. Save these instructions. Review all cautionary
markings on this product and in this manual. The Start•All Jump•Pack
®
is capable of starting gasoline engines up to six (6) liters and diesel
engines up to four (4) liters. There are variables such as extreme
outdoor temperatures and vehicle mechanical issues (bad starter,
no fuel or engine problems) that may limit the Start•All Jump•Pack
®
’s
ability to start an engine. The Start•All Jump•Pack
®
is designed to
instantaneously start a vehicle in a low voltage condition (5V and up).
Your Start•All Jump•Pack
®
is equipped with built-in safety protections.
These safety protections monitor and control the unit. To ensure
product longevity, activation is limited to forty-five (45) second
intervals. If you experience the unit timing out during a jump start,
cycle the main ON/OFF rocker switch to reactivate the jump start
function.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
