Start•All Jump•Pack
®
Lithium-Ion Jump Starter & Power Pack
12
If the product’s battery is excessively hot, emitting an odor, deformed,
cut, or is experiencing or demonstrating an abnormal occurrence,
immediately stop all use and contact Vanair
®
.
Light.
Staring directly into the light beam or shine of the flashlight may
result in permanent eye injury. The product is equipped with a high
output LED array that emits a powerful beam at the highest setting.
Cleaning.
Power off the product before attempting any maintenance
or cleaning. Clean and dry product immediately if it comes in contact
with liquid or any type of contaminant. Use a soft, lint-free (microfiber)
cloth. Avoid getting moisture in openings.
Radio Frequency Interference (RFI).
The product is designed,
tested, and manufactured to comply with regulations governing
radio frequency emissions. Such emissions from the product can
negatively affect the operation of other electronic equipment, causing
interference or other malfunctions.
NOTE:
Most vehicles will immediately start. Some vehicles may
require the Start•All Jump•Pack
®
to be connected for up to thirty (30)
seconds before starting. If the vehicle does not start right away, wait
ninety (90) seconds, and try again. Do not crank for more than fifteen
(15) seconds and do not attempt more than five (5) consecutive jump
starts within a fifteen (15) minute period. Allow the unit to rest for
fifteen (15) minutes before attempting to jump start the vehicle again.
Attempting more than the recommended cranks can lead to overheat
condition and may lead to possible fire and property damage.
Do not crank dead vehicle for more than fifteen
(15) seconds. Wait ninety (90) seconds in between
cranking attempts. Failure to do so will cause
damage to the starter and/or the Start•All Jump•Pack
®
. Repeated
attempts may lead to overheating, possible fire and property
damage.
