Start•All Jump•Pack
®
Lithium-Ion Jump Starter & Power Pack
16
COMPLETE JUMP STARTING GUIDE
1. Personal Safety & Battery Preparation
A. Please use safety glasses when jump starting any vehicle.
Remove personal metal items such as watches, rings and
bracelets when working with a lead-acid battery. It may cause
personal injury.
B. Please refer to your vehicle’s owner’s manual for proper jump
start connection location.
C. Identify the positive (RED) and negative (BLACK) terminals
before connecting the clamps. Make sure battery terminals are
clean and free of debris for safe connection.
2. Start•All Jump•Pack
®
Preparation
A. Place the Start•All Jump•Pack
®
on a flat surface and turn the
MAIN ON/OFF to the “ON” position
B. Check display to verify that the Start•All Jump•Pack
®
has at least
a 50% charge.
3. Make the Connection
A. Disconnect the red clamp and the black clamp from the Start•All
Jump•Pack
®
docking station. Note: LED should be flashing red
and green “8s” (indicates search for battery mode).
B. If your vehicle is equipped with jump posts, connect the positive
red clamp to the positive jump post. Next, connect the negative
black clamp to the vehicle ground. Otherwise, connections will
be made on the battery.
C. If connections are made on the battery directly, connect the
positive red clamp of the Start•All Jump•Pack
®
to the positive
(+) red terminal on the battery first, then connect the negative (-)
black clamp to the negative black terminal on the battery.
D. Once the battery is detected and is connected correctly, the LED
indicator will show a green “8”. Once the “8” is a solid green, you
must attempt to start the vehicle within forty-five (45) seconds
or the Start•All Jump•Pack
®
will time out. If time out occurs, you
must turn off the unit and repeat the process.
