Van Der Stahl V-460G Series, Operating Instructions Manual

Page: 65 / 116

V-460G/610G Series Operating Instructions Ver.4.02E
65
11 Depress the air pedal. (2nd)
A pressure lever descends and fastens a pouch with sponge rubbers.
Attention
When the lever is being lowered, removing foot from the
footswitch will raise the lever from its lowered position.
12 Depress the air pedal. (3rd)
When the air pedal is depressed for the third time, the following
procedures (from 1 to 7) are performed automatically.
1 Vacuuming starts and the vacuum lamp turns ON.
The vacuum level will be shown on the digital display.
2 When the vacuum level reaches to the set-up value, vacuum
process finishes. The vacuum lamp turns OFF.
3 Nozzle returns to the back position.
4
The pressure lever closes and sealing starts.
The heating lamp turns ON.
5 After heating is finished, the heating lamp is turned OFF and the
cooling lamp turns ON.
6 Cooling finishes and the cooling lamp turns OFF.
7 Sealing process is complete, and the pressure lever opens.
The vacuum nozzle moves forward automatically when the auto
return is activated.
13 Sealing is complete.
See 7XUQ2))WKHFLUFXLWEUHDNHUDQGSRZHUVZLWFKĺSDJH24)
and turn OFF the machine. When not using the machine for a while,
unplug the machine from the outlet.
(“Vacuum gauge vacum” operation cont’d)