Van Berkel International RM 22E, User Manual

Page: 18 / 44

REFRIGERATED MEAT MINCER RM 22E and RM 32E
18
Before to connect the meat mincer execute all the operations necessary for the control et
regulation before the starting.
ATTENTION !!!!
Is forbidden effect regulation during the meat mincer operation. All the regulations must be
effected with stop meat mincer and with current line get out.
7.3. Ordinary maintenance
For respect the long utilisation of meat mincer the operator must do the cleaning and
ordinary
maintenance.
7.4. Assembling and disassembling body inlet
Lift the hopper for release the entrance body (only for ventilated 22 and 32)
For montage (body worm conveyor) make:
 Take the body worm conveyour and thread them in the exactly seat.

Keep the hole charge in the high, rotate left the body; place lay it perfectly opposite the
ring nut (see table 4)
 Verify that the body don’t rotate in any sense

Block the knob (see table 4)
 For the disassembled operate in opposite direction
7.5. Assembling and disassembling body inlet
For assembling the archimedean screw:

Keep the archimedean screw
 Insert in the body archimedean screw just at when is insert in the pin that transmit the
rotation mouvement.

For disassembling operate in opposite direction
7.6 Assembling cutting system
ENTERPRISE system
For the montage operate:

Insert the knife on the pivot with board placed on the archimedean screw

Controle on the knife the cutting parts must be turn at exterior
 Instal the plate (with the pipe plate at exterior)
 The knife and the plate must be at contact

Insert the ring nut
7.7. Cleaning
The meat mincer must be cleaning: