manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 417 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 417

5. Press 

.

GUID-943B8E4E-7944-4407-989E-57B69332DFCD

A list of control unit pins appear.

6. Press the up arrow or the down arrow to view the control unit pin status

informed by the service personnel.

7. Press 

 to leave the IO-list.

5.6 

Automatic air conditioning error codes

Automatic air conditioning error codes are shown on the air conditioning display.

1

GUID-81330F1E-4908-4C8C-85BE-75113708C04B

1. Error code

If an error code is displayed on the air conditioning display, the air conditioning

system may not work properly. Contact an authorised Valtra workshop.

5.7 

Steering system malfunctions

CAUTION: If a malfunction occurs in the steering system, stop the

tractor and correct the malfunction before restarting.

If the oil supply from the hydraulic pump fails for any reason, the tractor can still

be steered with the steering wheel. In this case the steering valve acts as a pump

and provides oil pressure for the steering cylinder. The steering is heavier to use

than normally.

5. Troubleshooting

- 416 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments