Valtra T series Versu Operator'S Manual Download Page 338

Page: 338 / 450

4.7.4.4

Changing the recirculation filter

Change the recirculation filter periodically.

GUID-5869BA77-FE51-43C9-BD82-E15FE339AC7F

1. Filter element

2. Grille fastening clip

1. Open the grille.
2. Extract the filter element.
3. Change the filter element.

Make sure that the seal around the filter element fits into the grooves in the

air passage.
NOTE: Change the filter more frequently if needed.

4.7.4.5

Checking the front loader frame bolt tightness

Check the front loader frame bolt tightness periodically.
1. Open the battery casing.

4. Maintenance

- 337 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Search results

Summary of Contents for T series Versu

Reviews:

Valtra T series Versu, Operator'S Manual, Page: 338 / 450

Search results

Summary of Contents for T series Versu

Reviews: