manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 275 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 275

1

GUID-674D3F20-6AC0-47C3-9690-D849F5723F20

1. Nordic pick-up hitch

3.23.2 

Euro pick-up hitch

The Euro pick-up hitch is optional with four changeable implements.

WARNING: When attaching a trailer or implement, do not exceed the

maximum weight of the rear axle or the maximum load of the tyre type.

See the technical specifications in this manual for the maximum

permissible weights and loads

WARNING: Make sure that the maximum permissible towable mass is

not exceeded. Check the tractor identification plate for permissible

towable mass. Follow valid laws and regulations.

IMPORTANT: When attaching a trailer or implement, do not exceed the

maximum weight of the rear axle.

2

3

4

5

1

GUID-B3EC3D2B-211D-4BA1-8ECF-B8EA7245BD4C

3. Operation

- 274 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments