Maintenance check point
10 h
50 h
600 h
1200 h 2400 h
Check the wheel nut tightness.
●
●
●
Check the brake pedal free travel.
●
●
●
Check the parking brake.
●
●
●
Change the oil filters of the transmission and hydraulic system.
●
●
●
Check the engine breathing system.
●
●
●
Check the oil level in the front axle differential and hubs.
●
●
●
Change the oil in the hubs of the front axles with brakes.
●
●
●
Change the front power take-off oil and wash the oil filter.
●
●
●
Check the front power take-off couplings.
●
●
●
Grease the rubber surfaces of the trailer quick couplings.
●
●
●
Check the integrity of the air pressure system.
●
●
●
Check the air pressure system automatic water draining.
●
●
●
Fill the air pressure system antifreeze container.
●
●
●
Adjust the engine valves.
●
3)
Run the transmission automatic calibration.
●
4)
Change the oil in the hydraulic system.
●
●
Change the oil in the front axle differential and hubs.
●
●
Change the fuel filter and prefilter.
●
5)
●
Change the engine air filters.
●
6)
●
Change the selective catalytic reduction system supply module
main filter.
●
●
Check the front wheel toe-in.
●
●
Change the hydraulic breather.
●
●
Check the power shuttle operation.
●
●
Change the oil in the transmission system.
●
Change the transmission breather.
●
Clean the suction strainer.
●
Bleed the brake system.
●
Bleed the front axle brake system.
●
Clean the cooling system.
●
Change the cap of the coolant expansion tank.
●
Check the engine vibration damper.
●
Check the cab mounting.
●
Maintain the air conditioning.
●
1)
NOTE: In extremely dusty conditions or when using first generation Biodiesel fuel with dilution
over 7%, change the oil and filters every 250 hours. With second generation Biodiesel fuel the
service interval is normal (600 hours).
2)
NOTE: In extremely dusty conditions the cab ventilation air filter must be cleaned frequently.
3)
NOTE: The engine valves must be adjusted after 600 operating hours. After the first adjustment,
adjust the valves every 1200 hours.
4)
NOTE: The transmission automatic calibration must be run after 600 operating hours. After the
first calibration, run the calibration every 1200 hours.
5)
NOTE: When using first generation Biodiesel fuel with dilution over 7%, change the fuel filter
and prefilter every 500 hours. With second generation Biodiesel fuel the service interval is
normal (1200 hours).
6)
NOTE: In extremely dusty conditions the engine air filters must be changed more frequently.
4. Maintenance
- 310 -
