3.12.11.10 Travel distance view
You can change the travel distance unit (km, miles) by changing the unit of
length.
C3
A5
Km
28.8
01:40
B4
0
AUTO 1
P
GUID-AEE6115D-F3EF-42E7-9015-DC84E82E96B8
The travel distance is displayed as follows:
•
For distances <1 km (mile), the m (yard) symbol is displayed and the
distance is displayed with an accuracy of 1 m (yard).
•
For distances >1 km (mile), but ≤100 km (miles), the display symbol changes
to km (miles) and the distance is displayed with an accuracy of 2 decimals.
•
Distances >100 km (miles) are displayed with an accuracy of 1 decimal.
•
The maximum distance displayed is 999.9 km (miles).
You can reset the distance reading.
3.12.11.11 Surface area view
You can change the unit of area (ha, acre) by changing the unit of length.
C3
A5
ha
50.8
01:40
B4
0
AUTO 1
P
GUID-11F91F58-2013-47BF-A4D6-5C8A96BF7743
The surface area view shows the size of the area worked. The area reading
increases only when the selected trigger has triggered the surface area
calculation. For example, if the rear linkage position is used as the trigger, the
area is calculated when the implement is used to work the soil (the linkage is not
in the transport position).
The worked area is stored in the memory when the power is turned off from the
tractor.
The correct area calculation requires that the implement width is set correctly.
You can reset the area reading.
3. Operation
- 171 -