VALTIR QuadGuard M10, Product Manual

Page: 28 / 60

Valtir.com 27 Revision F August 2022
Step 4
Attach the front of the Fender Panels to the next Diaphragm using two (2) rail bolts and
large hex nuts per side. Use only the top and bottom holes and leave the center hole open
until the next Fender Panel is attached.
Step 5
Be sure Mushroom Washer lays flat against the Fender Panel as shown in Detail 26b.
Standoff on Mushroom Washer must be seated completely through slot.
Figure 26
Fender Panel Assembly
Detail 26b
Mushroom Washer Orientation
Detail 26a
Mushroom Washer Attachment
5/8” HEX NUT (SMALL)
DIAPHRAGM
SIDE PANEL,
FENDER PANEL, OR
TRANSITION PANEL
KEEP CENTER HOLE CLEAR
FOR NEXT PANEL
1 1/2 DIE SPRING
5/8” RAIL NUT (LARGE)
5/8” FLAT WASHER
BACKUP OR DIAPHRAGM
MUSHROOM WASHER
5/8” FLATHEAD
SOCKET SCREW FENDER PANEL
5/8” RAIL BOLT
5/8” RAIL NUT (LARGE)
5/8” RAIL BOLT
5/8 HEX NUT (SMALL)
1 1/2 DIE SPRING
BACKUP OR DIAPHRAGM
MUSHROOM
WASHER
5/8” FLATHEAD
SOCKET SCREW
FENDER PANEL
FENDER PANEL (ATTACHED)
5/8 FLAT WASHER
SLOT SLOT
FENDER PANEL
MUSHROOM
WASHER
CORRECT
INCORRECT