12
Revision D November 2022
Approved Adhesive
Monorail, Two Bays, QG, G
Monorail, Three Bays, QG, G
118710
611375
611379
End Cap, Monorail, QG, G
Cartridge Assy, Type I
Cartridge Assy, Type II
608136
606027
606029
Foundation/Anchoring
Important:
It is the responsibility of the local DOT or appropriate authority to
ensure this assembly conforms to the AASHTO Roadside Design Guide.
Warning:
It is the responsibility of the installer to ensure that your assembly
procedure meets all appropriate Occupational Safety and Health Administration
(OSHA) and local standards.
Asphalt Installations
Systems with a Tension-Strut Backup may be temporarily installed in construction zones on
asphalt. Assemblies on Asphalt Concrete
(“A.C.”)
must provide a minimum of 3” [76 mm] layer
of asphalt over a minimum of 3” [76 mm] layer of
Portland Cement Concrete
(“P.C.C.”)
, 6”
[152 mm] layer of asphalt over 6” [152 mm] layer of subbase, or 8” [203 mm] layer of asphalt with
no subbase.
Caution:
Only 18” [460 mm] threaded rods,
utilizing Valtir approved adhesive,
can be used with (asphalt) foundations. Contact Customer Service for a complete
list of approved adhesives (p. 3).
