VALTIR EURO-ET END TERMINAL, Product Description Assembly Manual

Page: 12 / 28

Valtir.com 11 Revision D February 2023
Assembling the EURO-ET™
Materials
As packaged, your EURO-ET™ system includes all materials needed for a complete assembly. This
will include a 12.0 meter pay length. Note that concrete footings or foundations are not required.
Recommended Tools
Documentation
• Manufacturer’s Assembly Manual
•
Manufacturer’s Drawing Package
Wrenches
• 38 mm Socket or Wrench
• 32 mm Socket or Wrench
• 24 mm Socket or Wrench
• 14 mm Socket or Wrench
Personal Protective Equipment
• Safety Glasses
•
Work Gloves
• Safety-Toe Shoes
• Back Protect on
• Reflective Vest
Miscellaneous
• Traffic Control Equipment
• Chalk Line
• Tape Measure
• Marking Paint
• Straight Edge
•
Level
• Plumb Line
• Augers
• Soil Tamper
• Post Pounder (commonly used for driving posts)
• 16 mm Alignment Tool (Drift Pin)
• Vise Grip Pliers or Channel Locks
Warning:
EURO-ET™ fasteners use imperial units and metric equivalents are
approximations. Metric tools may not be sufficient for assembly.
Note:
The above list of tools is a general recommendation. Depending on specific site
conditions and the complexity of the assembly specified by the appropriate highway
authority, additional or fewer tools may be required. Decisions as to what tools are
needed to perform the job are entirely within the discretion of the specifying highway
authority, and the authority’s selected contractor performing the assembly of the system at
the authority’s specified site.