Service and Installation Manual
23
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
light. Others LEDs will be off (Except the cleaning recommended indicator
light).
14.
If you want to make ice cubes after cleaning, press the ICE button to start
the ice –making cycle. When the ice machine start making ice, make sure
the front door is reinstalled.
15.
Discard the first two batches of ice.
Service and Installation Manual
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
4
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from
the power cord. For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a 3-prong grounding plug
that mates with a standard 3-prong grounding wall outlet to minimize the
possibility of electric shock hazard from the appliance. Have the wall outlet and
circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your
responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet.
The ice maker should always be plugged into its own individual electrical
outlet which has a voltage rating that matches the rating label on the appliance.
This provides the best performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated wires. Never unplug
your ice maker by pulling on the power cord. Always grip the plug firmly and
pull straight out from the outlet. Repair or replace immediately all power cords
that have become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. When moving the
ice maker, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this ice maker.
