![background image](http://html1.mh-extra.com/html/valore/l3-1800kn/l3-1800kn_installation-manual_852148039.webp)
39
Splitwood Kit 1800SWK
Materials Required
1800SWK Splitwood Log Kit, which contains:
• 12 Splitwood logs
• 4 bags of coal embers
• 1 bag of grey splinters
• 2 Bypass screws
• Left and right hand platforms
Installation
Fuel Beds
2
3 5
7
9
11
12
13
14 15
16 17
Left
Right
Installation—Bypass screw and platform
1. Replace bypass screw with one supplied in kit ac-
cording to gas used. See page 30 for instructions.
2. Place left and right sides platform around the
burner as shown (note pilot light cutout). The
platform rests in place and is not screwed down.
The openings go underside.
Installation—Logs
The following instructions show the best positions for
the logs and other pieces to obtain the best
fi
re.
1. Place log 12 with the right angle cutout under the
log around the rear left corner of the burner.
2. Place log 2 on top of 12, and across the burner to
rest on the platform as shown.
12
12
2