![background image](http://html1.mh-extra.com/html/valore/l3-1800kn/l3-1800kn_installation-manual_852148084.webp)
84
Appendix D—HeatShift System
Convection
ba
ɞ
e to be
removed
Convective
airflow with
baffle
removed
Take-off
collar
Firebox
Re-direction of convected air after removing ba
ɞ
e
Convective
air
ȵ
ow with
ba
ɞ
e in place
!
Remove Convection Ba
ɞ
e
To be e
ective the LDK Duct Kit requires that a
convection ba
ɞ
e located above the
ȴ
rebox inside the
appliance case be removed to allow the hot air
ȵ
ow to
convect upwards into ducts installed on the
ȴ
replace.
Remove the convection ba
ɞ
e from the
appliance. It is held in place by screws located
right behind the upper edge of the
ȴ
replace
opening (3 screws/ba
ɞ
e). Recycle this panel
as it is no longer needed.
Remove convection ba
ɞ
e—
1500, 1700, 1800 J or K
Appliance front panel—shown transparent for clarity
Conve
ction b
affle
Remove
2
convection ba
ɞ
es,
one on each side—1600J or K
Appliance front
panel—shown
transparent for clarity
Conve
ction b
affle
Conve
ction b
affle