![background image](http://html1.mh-extra.com/html/valore/l3-1800kn/l3-1800kn_installation-manual_852148059.webp)
59
Appendix B—Remote Control Operation
Initial Pairing
Before the remote control can be used with the
fi
replace, it must be paired. See page 49.
Remote Control Operation
NOTE: Before using the remote control system for the first time,
the receiver and the handset must be paired. See
the section
Remote Control Initial Pairing
on the
ȴ
rst page of this manual.
Main Display
To Turn O
Fire
Press to turn OFF.
Note:
There is a 2 minute delay after
switching o
before the next ignition is
possible.
Flame Height Adjustment
To increase
ȵ
ame height, press and
hold .
To decrease
ȵ
ame height, press and
hold . You may hold the button
down until the
ȴ
re is set to pilot
ȵ
ame
only.
CAUTION:
Always check the
ȴ
re and pilot visu-
ally to ensure they are o
.
AM
ON
OFF
PM
AM
Thermostatic Mode
Signal Indicator
Child Proof
Light
Fan (if included)
Program Mode
Temperature
Time
Auxiliary Feature (not used)
Countdown Timer
Battery Status
Eco Mode
°F or °C
To Turn On Fire
One-Button lighting (default):
Two-Button lighting: +
simultaneously
Press and hold for 4 seconds, until 8
short beeps and a blinking series of
lines con
ȴ
rms the start sequence has
begun. Release button.
Main gas
ȵ
ows once pilot ignition is
con
ȴ
rmed.
Handset automatically goes into
manual mode after main burner
ignition.
Standby Mode (Pilot Flame)
Press and hold to set appliance to
pilot
ȵ
ame.
NOTE:
When pilot ignition is con
ȴ
rmed, motor
automatically turns to maximum
ȵ
ame height.
CAUTION:
If the pilot does not stay lit after
several tries call your local service technician or
gas supplier.
(not included)