28
Logs Installation (1300IL)
Please note that
the position of the logs is critical to insure proper performance of the appliance.
4. Identify the right cross log; it has
a hole under on of its end and it is
the shortest cross log. Place it on
the right pin located on the rear
log. Rest its other end in the crook
of the front right log.
5. Identify the middle cross log. It does not have a
hole underneath. Place its narrow end on the
fl
at
depression in the rear log next to the right cross log
on the rear log. Place its wider end on the front log.
6. Identify the left cross log; it has a hole under its
narrow end. Place its narrow end on the pin located
on the rear log. Rest its
wider end on the the crook
in the front left log at an
angle of approximately 30
degrees from the center
line of the
fi
replace to allow
for the
fl
ame to come up in
front of the rear log.
1. Place the rear log centering it side to side in the
fi
rebox. Position forward until it sits against the
sheet metal return behind the burner.
2. Place the front left log on top of the burner with its
front edge resting on the vertical
fl
ange in front of
the burner.
3. Place the front right log on the top of the burner
with its left end abutted to the front left log and its
front edge resting on the vertical
fl
ange in front of
the burner.
Center the front logs side to side in relation to
the fi rebox. The seams of the two front logs
align with the middle peg of the cast grate.
Rear Log
against
Sheet Metal
Return
Burner
Vertical
fl
ange in
front of the burner
INSTALLATION
