31
Window Re
fi
tting
1. To re
fi
t the window, place it in its bottom railing and
push its top against the
fi
rebox.
2. While you hold it, pull the side levers back into the
window brackets on each side.
3. Pull out the top of the window and release it to
insure the springs return it.
4. Apply light hand pressure against the window frame
sides to bed-in the window seal.
Section
Views
Remote Control Initial Set-up
The receiver and the handset of the remote control
system must be initially synchronized before the
fi
rst
use.
1. Insert alkaline batteries in the remote control
receiver and handset. The receiver is located left of
the
fi
rebox.
2. With a sharp object, press and hold the receiver’s
reset button until you hear one short and one long
beeps. Release the reset button after the second
beep.
3. Within the subsequent 20 seconds, press the small
fl
ame button ( ) on the remote handset until you
hear two short beeps con
fi
rming the sychronization
is set.
This is a one time setting only and is not required when
changing the batteries in the remote receiver. The
remote control system is now ready to use.
INSTALLATION
