33
Caution
DO NOT let the cable touch the burner plate
above, it will melt during operation.
Installation
Battery Holder
Install Battery Holder
The batteries that power the receiver and handset need
to be installed prior to pairing and use.
1. Take the receiver out from under the
fi
rebox.
2. Insert four 1.5 V high quality
alkaline
batteries in
the battery holder and one high quality
alkaline
9 V
battery in the remote handset.
The battery holder and cable are supplied with the
appliance.
3. Connect the cable to the receiver as shown.
4. Connect the other end of the cable to the battery
holder..
5. Place the receiver and battery holder as shown be-
low (placement may vary with installed options).
6. Use a heat-resistant tie to gather any extra cable
between the receiver and the holder.
Receiver
Battery holder
Receiver
