Valor PORTRAIT 530IN, Installation Manual

Page: 29 / 50

29
Fuel Beds
Installation
Install rocks
To get the optimal fl ame e ff ect,
it is important to place the
rocks in their appropriate
position. Each rock is
embossed underneath with
letters and an arrow indicating
the position of the rock. The
arrows point to the front of the fi replace when the
rock is installed. See the image and table at the top of
the page to help you with the identi fi cation and position
of the rocks.
1. Identify the rocks
TFL, TL, TR, and TFR . These rocks
have pegs that fi t in the holes on the top of the rock
base. Install these rocks positioning them so that
the arrow embossed underneath point to the front
of the fi replace.
2. Identify the rocks BL, BC, and BR. These rocks have
two holes that fi t on the pegs of the ceramic plat-
form. Install these rocks positioning them so that
the arrow embossed underneath point to the front
of the fi replace.
3. Identify the rocks ML, MC, and MR. Those rocks
have pegs that fi ts in the holes on the top of the
rocks on the front row. Install those rocks position-
ing them so that the arrows underneath point to the
front of the fi replace.
4. Identify the rocks L and R. Those rocks don’t have
any peg or hole. Install those rocks as indicated, at
the left and right of the rock pile positioning them
so that the arrows underneath point to the front of
the fi replace. The rock rests against the other rocks
and is at an angled position. Make sure that the TFL
rock at the rear left is in the proper angle —see image
in step 2. See the image
at the top of the page.
You must be able to see
the edge of the platform
under the L rock as indi-
cated at left.
This rock is held by
a peg and does not
touch the rocks of
the back row
The edge of the
platform is visible
under the rock
Rock
ID
Description
Other
markers
Position in the
fi rebox
TFL Top far left 1 peg under Top row rear
TL Top left 1 peg under Top row rear
TR Top right 1 peg under Top row rear
TRF Top far right 1 peg under Top row rear
BL Bottom left
2 holes under, 1
peg above
Bottom row front
BC Bottom center
2 holes under, 1
hole above
Bottom row front
BR Bottom right
2 holes under, 1
peg above
Bottom row front
ML Middle left 1 hole under Middle row
MC Middle center 1 peg under Middle row
MR Middle right 1 hole under Middle row
L Left — Left side
R Right — Right side
TFL TFR
TR
BR
R
TL
BL
MR ML
BC
MC
L
Bottom row front Middle row
Top row rear
TFL
L rock