47
Glass retainer with a
deeper return
Brick retainer with a
shallower return
INSTALLATION
8. Slide the end panels towards the center and
slide the side end panel against the rear panel to
eliminate any gaps between them.
9. Ensure all panels are square against the back wall
of the fi rebox.
10. Push the 4 panel supports against the top of each
section and tighten their screw.
11. Two brick retainers and three glass retainers are
supplied with the panels. They are used to hold the
bottom of the rear panels against the rear wall of the
fi rebox. The brick retainers have a shallower return
and the glass retainers have a deeper return.
12. Hook one retainer to the back of the fi rebox rear
wall and fold it over the lip on which sits the ceramic
panel so it holds the panel against the rear wall.
13. Repeat with the other panels.
14. Re-install the rear media tray (3 screws).
QUALIFIED
INSTALLER