8
Thermostatic
Remote Control
Wall Switch
Wall Switch
Remote control handset
Gas shut-off valve
Top view
ON: parallel to pipe
OFF:
perpendicular
to pipe
Fireplace
Gas valve
Gas
shut-off
valve
The gas
shut-off valve
is located
behind the
front panel,
left of the
gas valve.
Fireplace Control Devices
There are two ways to control your fi replace.
1. Thermostatic Remote
Control;
2. Wall Switch.
The Thermostatic Remote
Control can be programmed
to function automatically—
see pages 9–14.
The Wall Switch can be used to turn on, off and to
increase or decrease the fl ame height—see page 15.
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your fi replace.
Press and hold the OFF button for a second (either on
the handset or the wall switch).
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
In the unlikely event that you cannot turn off your
fi replace with the remote control handset, use the
wall switch (if installed); if the wall switch malfunctions
and will not turn off the fi replace, wait 6 hours and the
fi replace will automatically go to pilot. You can then
access the controls inside your fi replace. Alternately,
turn off gas supply. In all cases, call your dealer for
service assistance.
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
First, ensure your fi replace is turned off —including
the pilot—and cold BEFORE going ahead.
Turn off gas supply to the fi replace. Access the gas
shut-off valve by removing the barrier screens and the
bottom black plate. The shut-off valve is located behind
the front panel on the left of the gas valve as indicated.
Turn the shut-off valve from the ON position (handle
parallel) to the OFF position (handle perpendicular) as
shown. This will cut off the gas supply to the fi replace
and will ensure that the main burner can not come on.
NOTE: Ensure shut-off valve is turned back to
ON position (handle parallel) before operating
the fi replace.
Automatic Shut-Off
(in certain conditions)
Your fi replace’s remote control is equipped with an
automatic shut-off mechanism which is activated
in certain conditions. See page 14 in the
Using the
Remote Control
section for a description of this feature.
OPERATING YOUR FIREPLACE
WARNING
RISKS OF SEVERE BURNS! SURFACES OF
THE FIREPLACE ARE VERY HOT DURING
OPERATION!
Be very careful and wear gloves to
access controls.
!
OWNER’S
INFORMATION
