22
• A non-combustible hearth is not necessary in front of this appliance.
• Note that the unit is installed at the framing stage and fi xed to framing using support angles. See page 32. Wall
fi nish is then installed afterwards over the support angles and up to the perimeter of the unit.
NOTE: If using a 613CCB front, refer to the kit’s instruction manual for framing dimensions.
33-3/4” to
header
- 29-3/4” to wall finish
- 30-3/4” when using
645CFV Clearview Front or
673 Edgemont Front
- 31-1/4” when using
613CCB Contemporary Front
See installation manual
packed with front trim
35-1/2”
Wall Finish
This is the framing
width. Wall finish
to 32-3/16” wide.
16” min. straight out or off the top venting.
Allow for elbow if rear vent with rise.
When the appliance is installed directly on carpeting, tile or other combustible material other than wood
fl ooring, the appliance shall be installed on a metal or wood panel extending the full width and depth of
the appliance.
Framing
45-1/2” (115.5 cm) min.
45-1/2”
(115.5 cm) min.
1-1/2”
(38 mm)
min.
clearance
64-1/4”
(163.2 cm) min.
FRAMING IN A CORNER
QUALIFIED
INSTALLER
Summary of Contents for HORIZON 534JN
Page 56: ......
