ASP SET Menu
The unit has a built-in Pink Noise generator to help set the relative speaker levels for multi-
channel audio playback.
ASP SET Features
NOTE:
When Down Sampling is On, the audio output signal will be converted to 48kHz. When
Down Sampling is Off, the original sampling frequency is preserved.
VIDEO Menu
VIDEO Menu Features
NOTE:
For standard discs not formatted for “widescreen”, use of the 16:9 aspect ratio will result
in image distortion.
SPEAKER Menu
Speaker Menu Features
Speaker Mode
Front
Surround
Subwoofer
Center
Full 6CH
DownMix
Large
Small
Large
Small
None
Present
None
Large
Small
None
6-channel mode
2-channel mode. If you select this mode, the
selections below will not be available.
Use when front speakers have good bass output.
Use when front speakers do not have good bass
output.
Use when rear speakers have good bass output.
Use when rear speakers do not have good bass output.
Use when rear speakers are not present.
Use when subwoofer is present.
Use when subwoofer is not present.
Use when center speaker has good bass output.
Use when center speaker does not have good bass
output.
Use when center speaker is not present.
Speaker Selection
Selecting LARGE for the multi-channel speaker option will give a full range output. Selecting
SMALL for the multi channel speaker option will activate a high pass filter whose crossover is
dependent upon the sub-woofer low pass filter frequency. For example, if the subwoofer low
pass filter is set to 80Hz, then the high pass SMALL speaker crossover will be set to 90Hz.
33
32
TV Shape
(Aspect Ratio)
4:3
16:9
Image is presented in wide view with a 4:3 aspect
ratio.
Image is presented in wide view with a 16:9 aspect
ratio.
Pink noise
DRC
Center Control
Rear Control
Down Sampling
Off
Left
Right
Off
On
5ms
4ms
3ms
2ms
1ms
0ms
15ms
12ms
9ms
6ms
3ms
0ms
Off
On
Stop output of pink noise
Left channel pink noise
Right channel pink noise
Employ the Dynamic Range Control for better
playback for low volumes.
Adjust the time difference between the center and
front speakers to create a time delay between
1 and 5 milliseconds, producing a more accurate
audio effect.
Adjust the time difference between the rear and
front speakers to create a time delay between 3
and 15 milliseconds, producing a more accurate
audio effect.
Normal Output
Audio signal output at 48kHz
Summary of Contents for DTS-660W
Page 1: ...DTS 660W...
