background image

2

CUSTOMER CARE

Thank you for choosing Valor

All Valor heaters are designed to meet the most stringent quality, performance and safety requirements to provide our
customers with many years of trouble free service.  This guide aims to improve your understanding and appreciation of
your new Valor heater, by providing simple and informative instructions to enable you to install it and to ensure that you
benefit from the excellent performance and features it has to offer.
If you require further assistance, the 

Valor AdviceLine

 will be pleased to help.

Please telephone 

08457 626 341

 (local rates apply in the United Kingdom

)

FOR OTHER USEFUL TELEPHONE NUMBERS SEE THE BACK COVER

IMPORTANT SAFETY INSTRUCTIONS

It is important that the following safety instructions are followed

Always

Always install the heater in accordance with the instructions. If in doubt obtain expert
 advice.
Always make sure the electrical socket is accessible and located adjacent to, but not above
 the heater.
Always disconnect the heater from the electrical supply before carrying out cleaning,
maintenance or replacing lamps.
Always make sure the heater is firmly secured to the fireplace opening to prevent the fire
from being tipped over.
Always use a fireguard when young children and infirm persons can come into contact
with the heater.
Always use genuine Valor spares.

Never

Never leave children unsupervised in a room where the heater in ON and unguarded.
Never obstruct or cover the fan outlet or force items into heater openings.
Never install or use the heater anywhere where water is in use, i.e. Bathrooms, Shower
Rooms etc.
Never use aerosols on or around the heater.
Never route the mains supply cable under carpet etc.
Never install the heater close to curtains or combustible materials.
Never use the heater to dry clothes etc.

Summary of Contents for 802











Reviews: