11. CERAMIC COALS INSTALLATION
This section is for models supplied with a ‘Coal’ fuel effect only.
For ‘Pebble fuel effect’ see section 12
11.1 Ceramic coal fuel effect installation for the Decadent and Dream models.
The ceramic fuel effect may cause staining / discolouration to decorative surfaces. It
is therefore advisable to protect decorative surfaces.
1.
Fit the ceramic coal into the fire above the burner.
The front of the ceramic coal should locate on the
horizontal faces but behind the vertical faces of the two
location brackets positioned at the front of the burner
module. See figure 20.
The coals should be positioned so that the arrows
always point towards the back of the firebox. When
located into position the stem of each arrow should be at
90° to the rear of the firebox.
2.
Hold coal ‘A’ upright with the arrow pointing to the top.
Locate coal ‘A’ as shown in figure 21.
Page 30
©
GDC Group Ltd. 2014
INSTALLER GUIDE
Figure 21.
Figure 20. Ceramic coal
base location
