15
Remote Control Operation
•
- Nighttime Setback
Temperature Mode
(Appliance
must be in standby mode; pilot
ignited)
-
The room temperature
is measured and compared to the
Nighttime Setback temperature.
The fl ame height is then automati-
cally adjusted to achieve the Night-
time Setback Temperature.
•
- Timer Mode
(Appliance
must be in standby mode; pilot
ignited)
-
The timers P1 and P2
(Program 1, Program 2) each can
be programmed to go ON and OFF
at specifi c times. For instructions
see Timer Programming Mode.
• Briefl y press SET button to scroll
to (light bulb) mode. Light bulb
icon fl ashes.
• Press and hold (large fl ame)
button to turn ON the light or
increase brightness.
• Press and hold (small fl ame)
button to decrease brightness.
NOTE:
The display shows the set temperature every
30 seconds.
NOTE:
The light bulb icon is displayed during light/
dimmer setting only. 8 seconds after the
light/dimmer has been set, the handset will
automatically go into temperature control
mode.
-
Light/Dimmer
LIGHT/DIMMER OPERATION (FIREBOX TOP)
Tip
Set the diff erent parameters when they are fl ashing.
T E M P
TIMER
OWNER’S
INFORMATION
Summary of Contents for 2200JN
Page 74: ......
