40
41
Remote control
Remote control
does not function
Battery is covered with
insulation tape
Pull out the insulation tape
Battery depleted
Replace battery with new one
Battery installed incorrectly Remove battery and install correctly
1. When using the remote for the first time, you must pull out the insulation tape.
2. Remove the battery if the remote control is not used for a month or longer. If the battery is
depleted, remove and dispose the old battery immediately.
3. Inserting/Replacing the Battery:
Remove the battery holder
Remove the battery from the battery holder
Disc does not play
back
Disc is warped or scratched
Use a disc that is in good
condition
Disc is dirty or wet
Clean the disc with a soft cloth
Incompatible disc is used
Use compatible disc
Disc rating exceeds Parental Lock
rating limit
Change Parental Lock settings
to allow such restriction
Disc region code is not compatible
with unit
Use disc with the proper region
code
Disc is inserted upside down
Insert the disc with the label side
up
Image
blurred,
distorted, or dark
Disc is illegally copied
Use the original disc
PBC cannot be used
during VCD playback
PCB is not available on the disc
No
repeat
or
searching
while
playing VCD
PCB is on
Turn PCB off
MP3
Interruption occurred
during playback
Disc is dirty or scratched
Clean the disc or replace the
disc
File is damaged/bad recording
Recreate disc with good files
Incorrect
playback
message displayed
Message is longer than LCD can
display
Shorten the name of the file
Error Messages
Message Displayed
Cause
Corrective Action
Loading
Disc is being read
No Disc
Disc is dirty
Clean the disc with a soft cloth
Disc is upside down
Insert the disc with the label side
up
Disc not present in loading
compartment
Insert disc
Bad Disc
Disc is dirty
Clean the disc with a soft cloth
Disc is upside down
Insert the disc with the label side
up
Unknown disc
Disc format is not compatible with
this unit
Region Error
DVD is not compatible with region
code of unit
Error
illegal mechanism operation
Press & hold the EJECT key for
5 seconds to reset loading
mechanism