INSTALLER GUIDE
Page 20
3.2.
Take four random coals and place
along the front coal as shown in figure 14.
Ensure that these coals bridge across from
the front coal to the matrix.
In order to get the best flame effect, it is
important that the coals are evenly
spaced, and have roughly equal gaps
between them.
3.3.
Take both finger coals and place one
at each end of the front row of coals as
shown in figure 15. Make sure that they
bridge across from the front coal to the
matrix.
3.4.
Take six random shaped coals
and position as shown in figure 16.
This second row of coals should rest
on top of the first row, overlapping
by 5-10mm. In order to get the best
flame effect, it is important that the
coals are evenly spaced, and have
roughly equal gaps between them.
Figure 16 Dress coal installation - stage 4
Figure 15 Dress coal installation - stage 3
Figure 14 Dress coal installation - stage 2
