INSTALLER GUIDE
Page 19
10. CERAMIC COALS INSTALLATION
1.
Remove the front coal from its
protective packaging and position in
front of the burner as shown in figure
11. The front coal should fit snugly
between the burner and the two raised
tabs on the front edge of the tray.
2
.
Remove the fuel matrix from its
protective packaging and position on top
of the burner as shown in figure 12. The
bottom of the matrix rear wall should
drop behind the two square
flanges at the top of the rear legs.
Ensure that the matrix sits flatly
on the top of the burner.
3.
There are two bags containing
the top dress coals:-
•
A bag with 4 square coals and
2 “finger” coals
•
A bag with 15 random shape
coals.
Open the bags and keep the
different types of coals separate.
Do not let the dress coals fall
into the holes and valleys in the
fuel matrix and front coal.
3.1
Begin the coal build by placing a
square coal in the centre of the front
coal, ensuring that it bridges across to
the matrix as shown in figure 13.
Figure 13 Dress coal installation - stage 1
Figure 12 Fuel Matrix
Figure 11 Front coal
