180-PE1006 v1.11
October 3, 2018
Page 5
PE1006
SPECIFICATIONS
Th
is unit was tested and listed UL 1482 (9/88) and ULC-S627 by Intertek
testing laboratories.
Th
is manual describes the installation and operation of the Princess
PEJ1006 catalytic equipped wood heater.
Th
is heater is certifi ed to comply with the 2015 U.S. Environmental
Protection Agency’s particulate emission limits for wood heaters sold aft er
May 15, 2015.
Under specifi c test conditions this heater has been shown to deliver heat at
rates ranging from 12000 to 35600 Btu/hr.
Th
is wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal regulations
to alter this setting or otherwise operate this wood heater in a manner inconsistent with operating instructions in this
manual.
Th
is wood heater contains a catalytic combustor, which needs periodic inspection and replacement for proper operation.
It is against federal regulations to operate this wood heater in a manner inconsistent with operating instructions in this
manual, or if the catalytic element is deactivated or removed.
Th
e combustor supplied with this heater is a Z4400G ceramic combustor. Consult the catalytic combustor warranty also
supplied with this wood heater. Warranty claims should be addressed to:
in Canada
in USA
Blaze King Industries / Valley Comfort Systems
Warranty Department, 1290 Commercial Way
Penticton, BC Canada V2A 3H5, Ph: 250-493-7444
Blaze King Industries
Warranty Department, 146A Street
Walla, Walla, Washington 99362, Ph: 509-522-2730
EMISSIONS
CO Average(%)
g/hr
Low Burn
0.05
1.48
Med-low Burn
0.09
2.05
Med-high Burn
0.115
2.73
High Burn
0.4
3.51
EPA emission rate weighted average 2.42 g/hr
Model
PE/PEJ 1006 (catalytic)
Height Classic
29 1/8” (740 mm)
Height Parlor
33 5/8” (854 mm)
Height Ultra
35” (889 mm)
Width
27” (686 mm) (without removable bypass handle)
Depth
30 3/4” (781 mm) (without optional fan kit)
31 5/8” (804 mm) (with optional fan kit)
Flue collar
6” I.D.
Fire door opening
16 3/8” x 8 1/4” (416 mm x 210 mm)
Firebox depth
18” (458 mm) brick to brick, 20 1/2” (521 mm) brick to glass
Firebox width
21 1/8” (537 mm)
Firebox height
12 1/2” (318 mm)
Fire box capacity
2.85 cu. ft.
Recommended Fuel length
16” max. (407 mm)
Wood capacity (approximate):
White oak - 60 lbs. (27.21 kg)
Fir - 40 lbs. (18.14 kg)
Construction
10 gauge & 1/4” fi rebox, brick lined.
16 gauge outer shields
Shipping Weight
355-400 lbs. (161-182 kg)
Chimney recommendation
15’ from stove top to chimney cap.
Summary of Contents for Blaze King PRINCESS PE1006
