Valley Comfort Systems Blaze King PRINCESS PE1006, Operation & Installation Manual

Page: 21 / 60

180-PE1006 v1.11 October 3, 2018
Page 21
PE1006
INSTALLATION INSTRUCTIONS
OPTIONAL ACCESSORIES
MOBILE HOMES — Requires SIDE SHIELDS (SS.PE1006) and OUTSIDE AIR KIT
(Z1726B) , and either FAN KIT (Z1714) or REAR SHIELD (Z4015) .
RESIDENTIAL ALCOVES — Requires SIDE SHIELDS (SS.PE1006) , and either FAN
KIT (Z1714) or REAR SHIELD (Z4015)
SIDE SHIELDS (SS.PE1006)
Side shields are required for:
MOBILE HOMES and RESIDENTIAL ALCOVES
REAR SHIELD KIT (Z4015)
EITHER this rear shield or fan kit (Z1714) is REQUIRED FOR:
MOBILE HOMES and RESIDENTIAL ALCOVES
FAN KIT (Z1714)
EITHER this fan kit or rear shield (Z4015) is REQUIRED FOR:
MOBILE HOMES and RESIDENTIAL ALCOVES
NOTE: Fan Kit should be installed before the stove is placed into position
ELECTRICAL CONNECTION:
Your Blaze King fan kit is equipped with a three-prong (grounded) plug to decrease shock
hazard. THIS PLUG SHOULD BE INSERTED DIRECTLY INTO A PROPERLY-GROUNDED,
THREE-HOLE RECEPTACLE. DO NOT CUT OR REMOVE THE GROUNDING PRONG
FROM THIS PLUG. Do not route the power cord in front or under the stove.
OUTSIDE AIR KIT (Z1726B)
REQUIRED FOR:
MOBILE HOMES
The outside air inlet hose is a fl exible tube to bring outside air for combustion into the stove
from outside the residence, through the wall or up through the fl oor. The fl exible tube will
allow some adjustment over or around fl oor joists or plumbing. DO NOT CHANGE THE
STRUCTURAL INTEGRITY OF THE FLOOR. This air hose must be kept open at all times to
provide outside air for combustion.