Valley Comfort Systems Blaze King PRINCESS PE1006, Operation & Installation Manual, Page: 13 / 60

180-PE1006 v1.11 October 3, 2018
Page 13
PE1006
INSTALLATION INSTRUCTIONS
FLOOR PROTECTION
If the stove sits on a combustible fl oor, a non-combustible shield must be used underneath the
stove and extending 16” out from the front and 8” on either side of the fuel-loading door in the
USA. In Canada a non-combustible shield must be used underneath the stove and extending 8”
on either side and rear and 18” out in front of the loading door.
A non-combustible shield is also required underneath the chimney connector and extending at
least 2” (50.8mm) on either side of the chimney connector.
See the next page for minimum sizes depending on model. This fl oor protection is required
to prevent sparks from falling onto the combustible fl oor. See CSA B365-M87).
This product
does not require thermal hearth pad protection.
Blaze King grants no warranty, implied or
stated, for the installation or maintenance of the
appliance and assumes no responsibility of any
consequential damage(s).
PARTS INCLUDED
1. Poker
2. Manual kit (w/ warranty cards, thermometer, fi re starter, bypass handle)
OPTIONAL EQUIPMENT
1. Fan kit (Z1714) 2. Convection deck (Z1744)
3. Rear shield (Z4015) 4. Ash drawer (Z1710
on parlor model
)
5.
Side Shields (ZSSP1006) (Classic / Parlor)
6. Fresh air kit (Z1726B)
•
BEFORE INSTALLING THIS APPLIANCE, CONTACT THE LOCAL BUILDING OR FIRE OR OTHER
AUTHORITY HAVING JURISDICTION AND FOLLOW THEIR GUIDELINES.
•
THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER. FOLLOW THE
INSTALLATION DIRECTIONS. DO NOT OPERATE WITHOUT FULLY ASSEMBLING ALL
COMPONENTS.
•
IF THIS APPLIANCE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT.
•
THIS APPLIANCE IS HOT WHEN OPERATED AND CAN CAUSE SEVERE BURNS IF
CONTACTED. CHILDREN AND PETS MUST BE KEPT FROM TOUCHING THE APPLIANCE
WHEN IT IS HOT.
•
COMBUSTIBLE MATERIAL SUCH AS FIRE WOOD, WET CLOTHING, ETC. PLACED TOO CLOSE
CAN CATCH FIRE. OBJECTS PLACED IN FRONT OF THE APPLIANCE MUST BE KEPT A
MINIMUM OF 48”(1219 MM) FROM THE FRONT OF THE APPLIANCE.