the fan blades.
Operation
• Carefully remove the
product from its packaging
and, before placing your
fan on the stove, check that
the blades rotate freely.
• Place your Valiant Heat
Powered Stove Fan on a
smooth level surface to the
side of the flue pipe, the
top section must not be
touching any hot surface.
• Your fan operates from
around 100°C to around
340°C - the optimum
operating temperature is
250°C.
• There is a bi-metallic safety
device in the base of the
fan. When the surface
temperature reaches 250°C
the safety device will lift the
front of the fan to protect
the motor and optimise
operation.
• The fan will operate with
any stove where the surface
temperature ranges up to a
maximum of 340°C (644°F).
Stoves exceeding this
range may cause damage
to the components of the
stove fan. If in doubt please
check the stove operating
manual.
• The fan automatically starts
as the surface temperature
increases, and slows to a
stop as the surface cools.
• We recommend the use of a
Valiant stove thermometer
to monitor and optimise
the temperature of the
stove, and maintain safe
operating conditions of
the stove.
• Running any stove too
hot or too cool may waste
fuel and cause dangers
to occupants, stove, flue
or fan.
Care and Maintenance
• Your Valiant heat powered
stove fan does not require
maintenance in typical
use, although the fan will
benefit from an occasional
clean when cool, using a
damp clean cloth. Carefully
remove any dust on the
cooling fins and blades.
• Do not immerse in water or
any solution.
• When not in use place
the fan in the original
packaging for safe storage.
Problem Solving
• If the goods have arrived
in a damaged condition
please contact your
supplier.
• In the unlikely event that
parts are missing or the
product is not working as
described, please contact
us at the address below
so that we may deal with
your problem swiftly and
minimise delays.
• If the fan appears to be
vibrating, this may be due
to the blades becoming
out of alignment. When the
fan is cool, slowly rotate
the blades while observing
the gap between the tip of
each blade and the top. If
one or more of the blades
is out of alignment they
may be gently adjusted by
holding the blades whilst
applying slight pressure
to the misaligned blade.
Check and repeat as
required.
Warranty
• Your Valiant heat powered
stove fan is guaranteed for
materials and workmanship
for 12 months.
• This limited warranty does
not cover normal wear and
tear or damage caused by
accident or misuse.
• Use of this product is
entirely at the consumer’s
risk.
• This does not affect your
statutory rights
Returns
• Please retain your proof
of purchase. You will need
to provide this receipt and
the batch number (found
on the fan motor) in any
correspondence.
• If you experience a
