- 22 -
This manual contains information deemed necessary for proper use,
knowledge and standard machine maintenance. It does not include
information on machine tool woodworking tech niques nor does it
discuss the types and processing capabilities of the various types
of wood; the user will find further information in specific books and
publications or by attending special training courses.
Warnings on use and maintenance regulations refer to normal operating
needs. Normal machine operations, working life and economy depend
on their observance.
These instructions are an integral part of the machine and must
accompany it in the case of repair or resale. Carefully keep the docu-
mentation supplied with the machine close at hand for consultation
in case of need.
For any repairs or revisions that require complex operations, please
contact authorised service centres which have specialised personnel.
The manufacturer is not liable for damages due to negligence, failure
to observe the instructions in this manual and direct and/or indirect
damages caused by improper use of the machine.
Failure to observe the indications, poor and inadequate machine use
and unauthorised tampering may void the warranty. Accident preven-
tion therefore depends on the strict observance of what is established
in this manual.
Upon purchase, make sure the machine is integral and complete.
WarnInG! Before using the machine, in order to ensure that
handling, initial start-up, starting, use, stopping, and maintenance
are carried out properly, read the instructions below that refer to
the drawings and technical data and apply them carefully. Before
starting work you should be familiar with the controls and the cor-
rect use of this machine, making sure that you know how to stop
it in the event of an emergency. Incorrect use of this machine may
result in serious injury and damage to property. always consider
your safety and the safety of others and act accordingly.
WarnInG! the machine is suitable for making cross, tilted and
slanted cuts on parallelepiped shaped wood. Cutting metal, plastic,
fabric, flammable materials and materials that generate harmful
or toxic dust and vapours is prohibited. any use other than that
indicated in these instructions may damage the machine and
constitute a serious risk to both people and property.
MaCHIne DeSCrIPtIOn (FIG. a)
1 Cutting off machine switch
2 Saw bench switch
3 Hand grip
4 Cutting off machine head release button
5 Resettable motor protection (where fitted)
6 Disc blade
7 Lower blade guard
8 Base
9 Cutting off machine rotary table
10 Piece supporting guide
11 Rotary table fixing screw
12 Rotary table insert
13 Side supports
14 Piece-locking vice
15 Upper blade guard
16 Removable blade guard
17 Saw bench working table
18 Working table insert
19 Piece guide
20 Motor
21 Knob for locking/unlocking the cutting off machine head
22 Screws for locking/unlocking the working table lifting
23 Tilting lever for cutting off machine head
24 Side supports fixing screws
25 Vice rod fixing screws
26 Sawdust/chip manifold
27 Saw bench divider knife
28 Anti-tilt support
29 Divider knife fixing screws
30 Dust/chip bag (where fitted)
31 Power supply plug and cable
32 Piece pusher
33 Blade perpendicularity adjustment screw
34 Blade inclination adjustment screw
35 Movable part of piece supporting guide
36 Fastening knob for movable part of piece supporting guide
DeSCrIPtIOn OF aCCeSSOrIeS
For production requirements or according to the machine model, some
accessories may differ from those listed below and/or may already
have been installed on the machine.
Cutting off machine:
- side supports
-
piece-locking
vice
Saw bench:
- piece guide
-
piece
pusher
Machine:
- dust/chip bag
- service key set
-
removable
guard.
DeSCrIPtIOn OF MarKS anD SYMBOLS (FIG. B)
1 Machine model and technical specifications.
2 Lot number and year of manufacture. The first 2 figures indicate
the year.
3 Electric and electronic waste may contain potentially hazardous
substances for the environment and human health. It should therefore
not be disposed of with domestic waste, but by means of differen-
tiated collection at specific centres or returned to the vendor in the
event of purchasing a new identical tool. The illegal disposal of such
equipment may result in prosecution to the full extent of the law.
4
WarnInG!
5
read these instructions carefully before using the machine.
6
Important! risk of cutting and crushing hands. It is compulsory to
wear protection gloves.
7
Important! risk of material ejection and dangerous dust emission.
It is compulsory to wear eye protection and a mask to protect
your respiratory tracts.
8
Important! risk of loud noise. It is compulsory to use ear protec-
tion.
9
Important! risk of electric shocks. Some parts of the machine are
electrically-powered. Do not touch them and keep a safe distance.
10
Important! risk of cutting and getting trapped. Keep your hands
away from the blade.
11
Important! Before any control, adjustment or maintenance,
always disconnect the machine from the power supply by unplug-
ging it. Should the power supply cable be damaged, remove the
plug from the power supply socket before inspecting it.
12
Important! risk of cutting and crushing hands. Keep a safe
distance from the blade and the cutting area.
teCHnICaL Data
Power voltage and nominal frequency
230V~50Hz
Nominal engine power
2000 W
Idle maximum rotation speed
4000 min
-1
Machine insulation class
II
Divider knife thickness (saw bench)
2 mm
Acoustic pressure LpA
112,1 dB(A)
Acoustic power level LwA
115 dB(A) K=3
Hand grip vibrations
7,07 m/s
2
K=1,5
Machine weight
19 kg
Circular blade for wood, steel body and teeth with carbide tips
Blade disk ext./int. diameter
305/30mm
Blade disk thickness
1,8 mm
Cutting thickness
3 mm
Performance:
Cutting head angle for cuts on a slope: 0° - 45° towards the left.
Cutting head rotation for angle cuts or cuts on a slope: 0° - 45° on the
right / 0° - 45° on the left with 9 pre-set stop positions.