- 21 -
WarnInG! Serious injury hazard! Do not touch the blade or
any part in motion while the machine is running. Be careful as
to how you move your arms and hands. Only remove the work
piece after turning off and unplugging the machine.
33) MACHINE MALFUNCTION
Turn the switch to OFF “O” (switched off), disconnect the power
supply to the machine by removing the plug from the socket when:
Not in use, left unattended, moved, the power cable is damaged,
when fixing or removing the work piece, during adjustments,
maintenance and cleaning.
34) WAIT FOR THE MACHINE TO STOP COMPLETELY
The motor, the moving parts and the blade continue to run for a
short while after the machine is switched off. During this time,
these parts must not be touched. Serious injury hazard!
35) DO NOT LEAVE THE MACHINE UNATTENDED WHILE RUNNING
Do not leave the machine unattended while running and wait until
all moving parts fully stop before leaving the machine after turning
it off.
36) KEEP THE WORKPLACE CLEAN AND TIDY
Mess and dirt are sources of danger. Make sure there are no tools
or objects around the machine that could be damaged. Do not
place tools or objects on the machine that could accidentally fall.
Frequently eliminate cutting residues from the machine and floor.
37)
HarMFUL DUSt
WarnInG! the dust produced by some types of wood is very
harmful to your health. Wear appropriate masks, extract the saw
dust from the machine and equip the room with an extractor for
air exchange.
38) REPAIRS MUST BE CARRIED OUT BY AUTHORISED PERSON-
NEL
Do not attempt to repair this machine or to gain access to its
internal parts. Always contact an authorised assistance centre.
Service by unauthorised personnel will cause the warranty to be
annulled and could create a dangerous situation. Keep proof of
purchase for warranty service.
39) REQUEST AND HAVE ORIGINAL SPARE PARTS ONLY INSTALLED
Request and use only original spare parts. Please contact your
dealer. The use of non-original spare parts will cause the warranty
to be annulled and could create a dangerous situation.
40) STORE THE MACHINE IN A SAFE PLACE
When not in use, keep the machine in a dry place out of reach of
children.
41)
reSIDUaL rISKS
WarnInG! Strict observance of the instructions with the use of
individual means of protection minimalists risks of accidents but
does not completely rule them out.
42) ALWAYS FOLLOW THESE INSTRUCTIONS
Only use this machine as described in these instructions. Do not
use it for purposes for which it was not intended.
eLeCtrICaL SaFetY reGULatIOnS
1)
DO nOt tOUCH LIve PartS
WarnInG! risk of electric shocks. Some parts of the machine
are electrically-powered.
2) KEEP CHILDREN AND ANIMALS AWAY FROM THE ELECTRICAL
DEVICES
Keep children and animals away from the devices connected to
the power supply.
3) CHECK THE POWER SUPPLY VOLTAGE
The power supply voltage must correspond to that indicated on the
technical data plate. Do not use any other type of power supply.
4) USE A TRIP SWITCH
It is advisable to fit a trip switch on the power supply line that trips
at the levels laid down in standards currently in force in the Country
in which the machine is used. Contact your local electrician.
5) CONNECTION TO THE POWER SUPPLY
Before connecting or disconnecting the machine to or from the
power supply, make sure that the switch is in the OFF “O” position.
6) DO NOT TAMPER WITH THE POWER CABLE
Do not tamper with the power cable. Do not replace the power
cable plug; only use a socket suited for the machine plug. Only
use the power cable as intended.
7) CHECK THE POWER CABLE
The power cable and extension cable (where applicable) must be
checked periodically and must be checked for signs of damage
and wear every time they are used. If they are not found to be in
good condition disconnect them immediately and do not use the
machine until an authorised assistance centre has repaired them.
8) KEEP THE POWER CABLE IN A SAFE POSITION
Keep the power cable and extension cable (where applicable) away
from the working area, damp, wet or oily surfaces, or surfaces
with sharp edges, heat sources, fuel and transit areas for vehicles
or pedestrians.
9) 10) DO NOT STEP ON OR FLATTEN THE POWER CABLE
Never step on the power cable. Be aware of its position at all times.
10) DO NOT USE THE MACHINE IN THE PRESENCE OF LIQUIDS
Do not wet it with liquids and do not expose it to damp envi-
ronments. Do not leave it out in the open.
11) USE AN EXTENSION CABLE SUITABLE FOR THE MACHINE
Only use an extension cable that is suitable for the power of the
machine you are using and sised according to its length; consult
your local electrician.
12) DISCONNECT THE MACHINE BY PULLING THE PLUG ONLY
To remove the plug from the socket, pull on the plug only and not
the power cable!
13) AVOID TOUCHING SURFACES THAT ARE EARTHED
Avoid body contact with earthed surfaces such as refrigerators,
radiators, pipes and metallic fixtures, etc. Using a platform to
electrically insulate the user from the floor is recommended.
_________________________________________________