background image

-  20  -

PROBLEMS, CAUSES AND SOLUTIONS

PROBLEM

CAUSES

SOLUTIONS

The power tool 

fails to start

Power supply line di-

sconnected

Check the electric power 

supply line

Plug not inserted 

Insert the plug in the 

electric power supply 

socket and press the 

start button

Switch in the OFF “O” 

position

Flip the switch to ON “I”

Electrical fault

Contact an authorised 

service centre.

The power tool 

vibrates a lot

Damaged or unbalan-

ced accessory

Substitute the accessory

Incorrectly assembled 

accessory

Disassemble the ac-

cessor y, clean the 

components and reas-

semble according to the 

instructions

 IMPORTANT! If the power tool still fails to operate correctly 

after you have carried out the above operations, or in the 

event of anomalies other than those described above, take 

it to an authorised service centre with proof of purchase 

and ask for original spare parts. Always provide the 

information shown on the technical data label.

STORAGE

Clean the machine and all its accessories thoroughly (see Main-

tenance section). Protect the unpainted parts with protective oil 

and use the original packaging or case (where fitted) to protect it.

Store the machine in a stable and safe position out of children’s 

reach. The place must be dry, free from dust, temperate and 

protected from direct sunlight.

Keep children and unauthorised personnel out of the storage 

room.

DISPOSAL

In order to protect the environment, proceed according to the 

local laws in force. Contact the relevant authorities for more 

information.

When the machine is no longer usable or repairable, deliver the 

machine and packaging to a recycling centre.

   Electric and electronic waste may contain potentially ha-

zardous substances for the environment and human health. It 

should therefore not be disposed of with domestic waste, but by 

means of differentiated collection at specific centres or returned 

to the vendor in the event of purchasing new equipment of the 

same type. Illegal disposal of waste will result in administrative 

sanctions.

WARRANTY

The product is protected by law against all non-conformities with 

regard to its stated characteristics, provided that it has been used 

solely in the way described in this user’s instructions, it has not 

been tampered with in any way, it has been stored correctly, it 

has been repaired by authorised personnel and, where neces-

sary, only original spare parts have been used.

In the event of industrial or professional use or similar, the 

warranty is valid for 12 months.

To issue a request for intervention covered by warranty, proof 

of purchase must be shown to the retailer or authorised service 

centre.

AMENDMENTS

The text, figures and data correspond to the standards in place 

on the date of printing the instructions contained herein. The 

manufacturer reserves the right to update the documentation 

if changes are made to the appliance, without being bound by 

any obligations.

© No part of this publication and the documentation enclosed 

with the appliance may be reproduced without written permission 

from the manufacturer.

Summary of Contents for SA 600





















Reviews: