12
14
Lower belt guard
15
Work surface lock lever
16
Belt adjustment screw
17 Motor
18
Machine base
19
Support feet
20
Power supply plug and cable
DESCRIPTION OF MARKS AND SYMBOLS (Fig. B)
1 Machine model and technical specifications.
2 Machine code, serial number or lot number, year of
manufacture, certification symbols (where applicable).
3 WARNING!
4 Read the instructions carefully before use.
5 Warning! Risk of cutting and crushing hands. It is
compulsory to wear protection gloves.
6 Warning! Risk of flying material and dangerous dust.
It is compulsory to wear eye protection and a mask to
protect your respiratory tracts.
7 Warning! Risk of loud noise. It is compulsory to use ear
protection.
8 Warning! Risk of electric shocks. Some machine parts
are live. Do not touch them and keep a safe distance.
9 Warning! Before any control, adjustment or mainte-
nance, always disconnect the machine from the power
supply by unplugging it. Should the power supply cable
be damaged, remove the plug from the power supply
socket before inspecting it.
10 Electric and electronic waste may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection
at specific centres or returned to the vendor in the event
of purchasing a new identical tool. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
11 Belt and abrasive disc rotation direction.
TECHNICAL DATA
Power voltage and nominal frequency
230 V~50Hz
Nominal engine power
300 W
Free disc rotation speed
2970 min
-1
Free belt speed
14,5 m/s
Acoustic pressure LpA
70 dB(A) K=3
Total machine dimensions (b x l x h) 360x278x375 mm
Machine weight
7.5 kg
Ø127mm abrasive disc with adhesive bottom
Current spare part code (subject to change) 1905071
25x762mm ring abrasive disc
Current spare part code (subject to change) 1905072
GENERAL SAFETY REGULATIONS
1) NYLON BAGS ARE NOT TOYS
WARNING! Suffocation hazard. Nylon packaging bags
can cause suffocation if placed on the head and must be
kept out of the reach of children. If they cannot be reused
they must be cut up and thrown in the garbage.
2) PEOPLE AUTHORIZED TO USE THE MACHINE
This machine must not be used by children or any persons
not fully aware of the instructions for use contained in
this manual. Local laws and regulations may establish a
minimum age for use of the machine. The operator must
be adequately trained to use, adjust and safely operate
the machine.
3) OPERATOR RESPONSIBILITY
The operator is responsible for other people as far as
accidents or damage to people or property caused by
the use of the machine is concerned.
4) MAINTAIN A STABLE AND SAFE WORKING POSITION
When working, maintain a stable, safe position and do
not lose balance.
5) PAY ATTENTION IN THE WORK AREA
Be careful of hands, the work piece and, in general, all
parts in motion.
6) USE CAUTION WHILE WORKING
Do not allow yourself to be distracted and always pay
attention to what you are doing. Use your common sense.
Never use the machine when tired, ill or under the influence
of alcohol, drugs or medicines that reduce alertness.
7) KEEP A SAFE DISTANCE FROM THE MACHINE
Keep people and animals away from the machine and your
work area. Do not touch electrically-powered parts.
8) PROTECT YOUR BODY
The use of the machine generates noise, heat, dust,
smoke, vibrations, flying chips and splinters. Always
use personal protective equipment in accordance with
the law to prevent injury to the body, hands, eyes, hea-
ring and respiratory tracts. Wear strong clothing, with
tight sleeves and cuffs, eye protection, working gloves,
safety earmuffs, dust masks and safety shoes. Do not
wear loose clothing, scarves, ribbons and jewelry that
could be caught in moving parts of the machine. Wear a
protective hairnet to gather long hair. Normal glasses are
not suitable for protecting your eyes.
9) EFFICIENCY OF THE MACHINE
Always make sure the machine is in good working order
and integral; it could cause serious accidents if in poor
conditions. Do not use the machine if the switch does not
allow you to switch the machine on or off.
10) INTEGRITY OF THE MACHINE
Do not remove any components from the machine unless
expressly indicated in these instructions and do not modify
the original configuration in any way.
11) DO NOT DISASSEMBLE THE MACHINE
Do not disassemble the machine for any reason. Do not
use the machine without the guards installed.
12) VERIFY THE SOLIDITY OF THE MACHINE
Periodically check that machine screws are tight.
13) USE THE MACHINE IN A WELL-VENTILATED ROOM
The machine must be used in a well-ventilated area in
order to ensure sufficient cooling and air circulation.
14) DO NOT USE THE MACHINE IN DANGEROUS ENVIRON-
MENTS
Do not use the machine in areas with a risk of explosion
and/or fire, in poorly ventilated spaces or in the presence
of inflammable and/or explosive materials, dampness,
gases, vapours, and acids.
15) MOVING OF THE MACHINE
The machine should be moved with caution. Hold it only
with two hands under the base to move. Do not attempt to
move the machine by pulling on the power cord or other
machine parts.
16) POSITIONING OF THE MACHINE
Use the nuts and bolts to position and secure the machine
on the work bench or stand with a flat, solid and non-
flammable surface that must support the total machine
weight and vibrations caused by use. Using the machine
without securing it and on flammable surfaces such as
wood, plastic, etc. is prohibited.
17) WORK WITH ADEQUATE LIGHTING
Only work when there is sufficient daylight or suitable
artificial lighting.
