- 31 -
6- Service procedures - Magnetic clutch
4. Install the armature assembly on the driveshaft
together with the original shim(s) and
press it
down.
5. Install the armature bolt and tighten it to the
specified torque using an armature holder
(for 3-hole armature) or a spanner (for 2-way
stopper armature) to prevent armature
assembly rotation.
Specified torque: 25 - 30 N·m
{
2.5 - 3.1
kgf·m,
18 - 22
lbf·ft}
6. Check that the clutch clearance is as specified.
If necessary adjust the clearance using shim(s).
Adjusting shims are available in the following
thicknesses:
Shim Part No.
Thickness
Z0010245
0.2 mm {0.008 in}
Z0010246
0.3 mm {0.012 in}
Specified clearance: 0.3 - 0.7 mm
{
0.012 - 0.028 in
}
8. Run in the clutch as described on page 21.
Spanner
2-way stopper
armature (2)
Adjusting
shims
Armature
holder
3-hole
armature (1)
Adjusting
shims
Gap adjustment
0.3 - 0.7 mm
Thickness
gauge
