12
Cleaning and Maintenance
General
Clean the griddle toaster regularly. A clean appliance looks better, will last longer and will perform
better. Carbonised grease on surface or on griddle plate will hinder transfer of heat from cooking
surface to food. This will result in loss of cooking efficiency.
NOTE: Each griddle toaster option can be supplied with a scraper tool and a pack of blades for
cleaning the griddle surface. These are not supplied as standard and have to be purchased
separately. Refer to 'Replacement Parts List' at rear of this manual.
DO NOT use water on griddle plate while this item is still hot as warping and cracking
may occur. Allow griddle plate to cool down before cleaning.
NOTE:
DO NOT use abrasive detergents, strong solvents or caustic detergents as they could
corrode or damage griddle toaster.
In order to prevent forming of rust on griddle plate (Steel Plate), ensure that any detergent
or cleaning material has been completely removed after each cleaning.
Appliance should be switched ‘On’ briefly to ensure griddle plate becomes dry. Oil or
grease should be spread over griddle surface to form a thin protective greasy film.
To keep your griddle toaster clean and operating at peak efficiency, follow procedures shown
below:-
After Each Use
1.
Clean griddle with a scraper tool to remove any food debris.
2.
Always ensure scraper tool blades are changed regularly to ensure scraper tool works efficiently and
prevents damage to griddle plate surface.
Always turn ‘Off’ gas supply before cleaning.
This appliance is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
Caution
Always ensure that even pressure is applied over whole surface of scraper tool
when using on flat surface of griddle, to prevent scoring of griddle surface.
NEVER bang sharp edge of scraper tool on flat surface of griddle as this will
damage griddle and invalidate the warranty.
Caution
T
HE
BLADES
FITTED
TO
THE
SCRAPER
TOOL
ARE
EXTREMELY
SHARP
AND
ARE
TO
BE
USED
WITH
CARE
.
Warning
