10
FR
Informations pratiques
C
10
EN
Using the appliance
B
Electrical connections and safety
You must follow the instructions below for the cooker's electrical connection.
The electrical connection must be carried out by a qualified individual, in line with the
applicable standards.
•
The appliance must be connected by an authorised person. You must use a H05W-F type
power cable. The cooker has been designed to be connected via a permanent connection
with the electrical network.
• The connection must use a grounding plug. If you don't have a grounding plug that is
compliant with regulations, contact a qualified installation technician.
• A compatible power cable that can be appropriately isolated during the connection process
must be used. If the cable is damaged, contact the after-sales service. The power cable
should only be replaced by the after-sales service.
•
The power socket must be located close to the cooker. Do not use an extension cord.
• Ensure that the power cable does not touch the hot surfaces of the cooker or the back
of the appliance. This could damage the cable or the cooker, or cause a short circuit.
• Incorrect electrical connection may damage the cooker. Such damage is not covered by
the guarantee.
•
The cooker is designed for a connection of 220-240 volts and 400 V 3 N. If your electrical
network has a different voltage, please immediately contact a qualified installation
technician.
•
Arrange for the installation of a two-pole time-delay circuit breaker, with a minimum
distance of 3 mm between the contacts and rated at 32 A.
• The manufacturer may in no way be held liable in the event of damage or loss caused by
any failure to comply with these safety instructions.
L3
L2
L1
3
4
5
N
PE
2
1
L
3
4
5
N
PE
2
1